For going into the ship’s tonnage or other confined spaces, in general you will have to need the possibility to measure Carbon Dioxide (CO2), Carbon Monoxide (CO), Oxygen (O2), Hydrogen Sulphide (H2S), to be sure you will not enter a hazardous environment. 7Solutions let you have this possibility to measure these gases, choosing from the largest selection of different measuring ranges.
Besides these general gases, tanker ships will encounter several different kind of gases. Common gases, depending on what they are carrying, are:
Acetaldehyde, Acetic Acid, Acetone, Acrylonitrile, Ammonia (NH3), Aniline, Arsine (AsH3), Benzene, Butadiene, 2-Butanol, Carbon Disulphide, Carbon Dioxide (CO2), Carbon Monoxide (CO), Chlorobenzene, Dichlorobenzene, Ethanol (Ethyl Alcohol), Ethyl Benzene, Ethyl Glycol, Ethyl Acetate, Gasoline, General Hydrocarbons, N-Hexane, Hydrogen Sulphide (H2S), Hydrogen (H2), Iso-Butane, Isoprene, Isobutanol, Isobutylene, Mercaptans, Methanol (Methyl Alcohol), Methyl Bromide, Methyl Ethyl Ketone, Methyl Isobutyl Ketone, Nitric Acid, Nitrogen Oxide/Dioxide, Oxyde (O2), Pentane, Phosphine (PH3), Propane, Propylene, Styrene, Sulphuric Acid, Sulphur Dioxide, Toluene, Trichloroethane, Vinyl Chloride, Water Vapour, Xylene.
For the lowest cost solution of purchasing a 100ml air sampling pump, take a look at the Gas Tester I. Also with this pump you are sure of drawing a 100ml of gas through your gas detection tube for accurate measurements.